Injin Cnc Da Manual Machining Na Tushen Ruwa

1.Machining Of Marine Propellers

• (1) Cire masu tashi, ƙofofi da sauran abubuwan da suka wuce gona da iri a duka ƙarshen cibiyar, yana haifar da jiragen sama guda biyu tare da santsi na 5 da rashin daidaituwa na ƙasa da 0.1mm.
• (2) Rashin gajiya ko juyowa shasha ramuka a tsakiyar cibiyar propeller, santsi shine 25, kuma rashin daidaituwa bai wuce 0.15mm / M ba.
• (3) Saka ramin plating tare da ciki na ramin shaft. Ya kamata ɓangarorin biyu na ramin maɓalli su kasance daidai da kusurwar ramin da aka matse. Alamar lamba tare da maɓalli bayan taro bai zama ƙasa da 75%.
• (4) Haɗin da ke tsakanin mazugi da ramin maɓalli kuma za a iya raba shi gida biyu: haɗin gwiwa da haɗin kai mara kyau. Tare da kuma ba tare da maɓalli ba, abubuwan da ake buƙata don cibiya da shaft sun bambanta. Bonded epoxy bonding na bukatar wani mating surface tare da tsawon 30 ~ 70mm a kowane karshen tapered rami. Sauran sun kasance 0.2 ~ 0.3mm ƙasa don bincike da dacewa. Babu rami a cikin mazugi akan shaft. Lokacin da aka yi amfani da haɗin gwiwar epoxy, ana iya rage buƙatun sarrafawa da buƙatun haɗin maɓalli da maɓalli, rage yawan aikin bincike da haɓakawa.
• (5) Formula na epoxy adhesive

2.Manual Machining Of Marine Propellers

Abubuwan da ke cikin sarrafa hannu sun haɗa da: cibiya, ruwa, surface jiyya na cibiya da goge ramukan ramuka, kawar da rashin daidaituwa, ta amfani da felun iska, dabaran niƙa da fayiloli da yawa.

Matakan sune: bisa ga sakamakon auna, zana layin sarrafawa, yanke bayanin martaba a cikin batches, cire wuce haddi na ƙarfe daga cikin babur, kuma sanya farfela ya sami abin da ake buƙata.

(1) Injin saman ganye

Lokacin yin samfurin foliar, gabaɗaya duk izinin injin ana sanya shi a bayan ganyen. An yi imani da cewa saman ganye yana fuskantar ƙasa, kuma ingancin simintin yana da sauƙi don tabbatar da santsi. A wannan yanayin, da geometry na ruwa surface ko da yaushe deviates. Ayyukan injin foliar shine gyara karkacewar da aka samu lokacin kayan aikin gyare-gyare. Yayin sarrafawa, bisa ga sakamakon auna simintin, yi alama da maki da yawa akan kowane sashin radius na ruwan wuka inda dole ne a cire kaurin Layer na karfe, sannan a huda ramuka a kowane wuri don kawai cire kaurin Layer na karfe. Za a iya gama saman ruwa ta hanyar cire wuce gona da iri tare da radius yanke jirgin sama don samun adadin layukan farfasa masu santsi. Dangane da waɗannan layukan farfaganda, za'a iya cire ƙarfen da ya wuce gona da iri tare da radial na ruwa.

(2) Leaf back machining

Ana sarrafa ruwan wukake da baya tare da saman ruwa a matsayin abin da ake tunani. Bayan an ƙera saman ruwa a cnc, ana sake auna kaurin ruwan. Dangane da buƙatun zane, an ƙayyade kauri na ƙarfe da za a cire daga ruwa a baya. Kamar yadda ake sarrafa saman ruwa, ana haƙa rami da farko kuma ana cire sassan da aka yanke Siffar Siffar, sannan a cire wuce haddi na ƙarfe radially tare da ruwa.

Shiga wannan labarin ： Injin Cnc Da Manual Machining Na Tushen Ruwa

Bayanin Bugawa: Idan babu umarni na musamman, duk labaran da ke wannan rukunin yanar gizon asali ne. Da fatan za a nuna tushen don sake bugawa: https: //www.cncmachiningptj.com/，thanks！

PTJ® yana ba da cikakken kewayon Custom daidaici cnc machina china sabis. ISO 9001: 2015 & AS-9100 bokan. 3, 4 da 5-axis saurin daidaito Cibiyar CNC ayyuka ciki har da niƙa, juyawa ga takamaiman kwastomomi, Caparfin ƙarfe & kayan aikin roba tare da haƙuri +/- 0.005 mm.Sakarantun sakandare sun haɗa da CNC da nika na al'ada, hakowa,mutu Fitar,karfe da kuma stam.Yawan samfoti, cikakken kayan aiki, tallafi na fasaha da cikakken dubawa mota, jirgin sama mai saukar ungulu, gyare-gyare & tsayarwa, jagoran haske,likita, keke, da mabukaci kayan lantarki masana'antu. Isarwar lokacin-lokaci.Ka gaya mana kadan game da kasafin kudin aikin ku da lokacin isowar sa ran ku. Zamu tsara tare da ku don samar da ayyuka mafi tsada don taimaka muku don isa ga burin ku, Maraba da Tuntube mu ( sales@pintejin.com ) kai tsaye don sabon aikin ku.